USE AT YOUR OWN RISK!!!
-----------------------

The following commands apply to the latest firmware (4.2.10.0.0). 

Command Groups
--------------

[adsl]=>config status

Parameters :
 [status = <{down|up}>] 
     The administrative state of the interface.

[wizard]=>help
Following commands are available :

config           : configuration of embedded wizard
def              : Profile definition.
view             : View active profile
flush            : Clear active profile

[diag]=>help
Following commands are available :

config           : Configure diagnostics settings
ifhide           : Specify interfaces to hide
iflist           : List (dynamically generated at webpage load) of all
                   interfaces to be diagnosed (debug command)
ifconfig         : Configure pingoption and/or ip-address for connection
flush            : Flush all hidden interfaces and ifconfigurations

[dnsc]=>help
Following commands are available :

add              : Add a DNS server.
config           : Modify the DNS resolver configuration.
delete           : Delete a DNS server.
flush            : Remove all DNS servers.
list             : List all DNS servers.
nslookup         : DNS lookup for a domain name or an address.

[stream]=>help
Following commands are available :

info             : Shows all modules with some info.
list             : List the currently known streams. (most recent first.)
desc             : Describes a stream by ID.
dump             : Hexdump the stream cache.
enable           : Enables the stream cache (default).
disable          : Disables the stream cache.
flush            : Flushes the stream cache.
stats            : Displays memory/cache statistics.

[dhcp server]=>config spoofing
Missing parametervalue at the end of command :
:dhcp server config spoofing
	[spoofing = <{off|on}>] 
     	Enable/disable DHCP handing out addresses negotiated by PPP on WAN side.


The following speedtouch debug commands can be executed:
--------------------------------------------------------

ip dt  match [match] ...     	
    match == <offset>,<size>,<byte1>,<byte2>,...
      <offset> : byte offset in pdu to start match
      <size>   : specifies size of match
      <byte>  : 'size' 8-bit values to match
    e.g. :
    dt 12,4,192,0,0,1 16,4,255,255,255,255 matches all broadcasts from 192.0.0.1
				: Define/add new ip trace
ip lt				: List ip trace(s)
ip ct  trace_num [trace_num] ...: Clear/delete ip trace(s) ('*' = all)
ip -t				: Disable tracing
ip +t				: Enable tracing
sea bstats			: Show periodic bridge statistics.
sea istats			: Show interrupt statistics.
sea pstats [<port>['-'<port>]]	: Show port statistics.
sea clear			: Clear statistics.
sea sq ['-a'] | (['-b' ['-h']]['-[serw]'][<queue> [<limit>]])
				: Show SEA queue info.
upnp stats			: Print upnp statistics
upnp search			: Send out test SSDP MSearch message
mdap search			: Sends out a MDAP search datagram
mdap tron			: Enables mdap trace
mdap troff			: Disables mdap trace
eth stats [<intf>]		: Show Ethernet interface statistics.
eth clear [<port>]		: Clear Ethernet port statistics. 
eth trace [<port>][<mode>]	: Toggle tracing of Ethernet frames.
				  Mode is a set of filter bits:
				  (1=others, 2=LLC, 4=ARP, 8=IP)
eth <len>			: Set the length of traced frames.
sachem get_config		: Get current modem configuration.
sachem get_state		: Get current modem state.
sachem activate_performance [time]
				: Activate the performance reports every time sec.
sachem deactivate_performance	: Deactivate the performance reports.
sachem get_data {dataType}	: Get data from modem.
sachem do			: ?
tdsl LOVTest			: Longitudinal Output Voltage
tdsl LCLTest			: Longitudinal Conversion Loss
atm otrace			: Toggle OAM F4/F5 tracing.
atm sxt				: Show the full/VPL/VCL Cross-connect table.
atm stt				: Show the Traffic descriptor table.
atm svt				: Show the full/VPL/VCL table.
atm tvc <prt> <vp> <vc>		: Trace VP/VC toggle.
atm tlen <number>		: Traced bytes per cell/frame.
atml stats			: Show ADSL0/AAL5/? statistics
atml pstats			: ? statistics.
atml gstats			: ? statistics.
atml istats			: Show interrupt statistics.
atml dstats			: Show detailed discard/congestion statistics.
atml clear			: Clear statistics. 
pptp ctrace [on/off]		: set or toggle control flow tracing
pptp dtrace [on/off]		: set or toggle data flow tracing
dbg spt [-m <module>] [-l <prio>]
				: Set priority and
        [-f <fgcolor>] [-b <bgcolor>]
				: colors of print module(s).
dbg fvt <vtrace>		: Flush contents of vs-traces.
dbg spo [<time | module> on | off]
				: Set (Get) trace output format.
dbg cpuload -t			: Toggle load calculation on or of.
dbg cpuload -s			: Show load calculation.
dbg cpuload -c [<count>]	: Calibrate load calculation.
err stats			: Show Error statistics.
err stats -c			: Clear Error statistics.


Some Examples:
--------------

[td]=>call

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

cmd = atml stats 1
:td call cmd="atml stats 1"
Periodic statistics enabled - period = 1 seconds.

Press [ALT + Q] to start console logging, [ALT + S] to stop.

(full downstream utilized.)

Port Name   Rxed: cps -  bps Txed: cps -  bps HEC-errors Hdr-errors
---- ----   ---------------- ---------------- ---------- ----------
   0 ADSL-0   7553 - 3202472    236 -  100064          0          0 <-
   1 VOICE       0 -       0      0 -       0          0          0
   2 ATMF25      0 -       0      0 -       0          0          0
   4 AAL5      236 -  100064   7553 - 3202472          0          0
   5 CELL        0 -       0      0 -       0          0          0

(full upstream utilized.)

Port Name   Rxed: cps -  bps Txed: cps -  bps HEC-errors Hdr-errors
---- ----   ---------------- ---------------- ---------- ----------
   0 ADSL-0     78 -   33072   1813 -  768712          0          0 <-
   1 VOICE       0 -       0      0 -       0          0          0
   2 ATMF25      0 -       0      0 -       0          0          0
   4 AAL5     1813 -  768712     78 -   33072          0          0
   5 CELL        0 -       0      0 -       0          0          0

For a fully utilized link, values 3202472 DS and 768712 US, should be close
to the reported sync speeds:

[td]=>call cmd="sachem get_data [{far_ch_fast|near_ch_fast|far_ch_interl|near_ch_interl}]"

Channel operational data report :
---------------------------------
Downstream used ATM rate Fast      : 3200 kbit/sec (= 3.200.000 bit/s)
Upstream used ATM rate Fast        :  768 kbit/sec (=   768.000 bit/s)


[td]=>:td call cmd="sachem get_data pm"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Performance counters report
---------------------------

Near end : Upstream
Far  end : Downstream

NearEnd : Fec NI  = 0
          Fec I   = 0
          Crc NI  = 0
          Crc I   = 0
          Hec NI  = 0
          Hec I   = 0
          Tot I   = 0
          Tot NI  = 8410
          Act I   = 0
          Act NI  = 36
          BER I   = 0
          BER NI  = 0
FarEnd : Fec NI  = 0
         Fec I    = 0
         Crc NI   = 0
         Crc I    = 0
         Hec NI   = 0
         Hec I    = 0


[td]=>:td call cmd="sachem get_data fm"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Defects poll report
-------------------
Near End present alarms :
Near End alarms state change occurred :
Far End present alarms :
Far end alarms state change occurred :

[td]=>:td call cmd="sachem get_data near_id"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Near end identification         :
ITU_VendorId countryCode        : 0
ITU_VendorId vendorCode         : ALCB
ITU_VendorId vendorSpecific     : 0
ITU_StandardRevisionNbr         : 0
ANSI_ETSI_VendorId              : 0
ANSI_ETSI_VendorRevisionNbr     : 0
ANSI_ETSI_StandardRevisionNbr   : 0
ALC_ManagementInfo              : 0

[td]=>:td call cmd="sachem get_data far_id"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Far end identification          :
ITU_VendorId countryCode        : 0
ITU_VendorId vendorCode         : ALCB
ITU_VendorId vendorSpecific     : 0
ITU_StandardRevisionNbr         : 0
ANSI_ETSI_VendorId              : 0
ANSI_ETSI_VendorRevisionNbr     : 0
ANSI_ETSI_StandardRevisionNbr   : 0

[td]=>:td call cmd="sachem get_data near_line"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Near End line operational data :
RelCapacity   downstream   =    48 pct
NoiseMargin   downstream   =  22.5 dB
OutputPower   upstream     =   4.5 dBm
Attenuation   downsteam    =  18.0 dB
Operational Mode           =     2

[td]=>:td call cmd="sachem get_data far_line"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Far end line operational data
relCapacity   upstream     =    77 pct
noiseMargin   upstream     =   8.0 dB
outputPower   downstream   =  12.5 dBm
Attenuation   upstream     =   7.0 dB
Carrier Load :
 0 : 0  0 0  0 0  0 0  0 0  0
10 : 0  0 0  0 0  0 0  0 0  0
20 : 0  0 0  0 0  0 0  0 0  6
30 : 7  8 9 10 10 10 10 10 10 10
40 : 10 10 10 10 10 10 9  9 9  8
50 : 8  7 6  0 0  0 0  0 0  0
60 : 0  0 0  0 0  0 0  2 2  2
70 : 2  3 4  4 4  4 5  5 5  5
80 : 5  5 5  6 6  6 6  6 6  6
90 : 6  6 6  6 6  6 6  6 2  6
100 : 6  6 6  6 6  6 6  6 6  6
110 : 6  6 6  6 6  6 6  6 6  6
120 : 6  6 6  6 6  6 6  6 6  6
130 : 6  6 6  6 6  6 6  6 6  6
140 : 5  5 5  5 5  5 5  5 5  5
150 : 5  5 5  5 5  5 5  5 5  5
160 : 5  5 5  5 5  5 5  5 5  5
170 : 5  5 5  5 5  5 5  5 5  5
180 : 5  5 5  5 5  5 5  5 5  5
190 : 5  5 5  5 5  5 5  5 4  5
200 : 5  5 5  5 5  5 4  5 5  5
210 : 5  5 5  5 4  4 5  5 4  5
220 : 4  5 4  5 5  4 5  5 4  5
230 : 4  4 5  5 4  5 4  5 4  4
240 : 4  4 4  2 2  0 0  0 0  0
250 : 0  0 0  0 0  0

[td]=>:td call cmd="sachem get_data near_ch_fast"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Channel operational data report :
---------------------------------

Downstream used ATM rate Fast          : 3200 kbit/sec

[td]=>:td call cmd="sachem get_data far_ch_fast"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Channel operational data report :
---------------------------------

Upstream used ATM rate Fast        : 768 kbit/sec

[td]=>:td call cmd="sachem get_config"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

CUSTOMER CONFIGURATION DATA :

US Power Cutback              : 0
POTSoverlayOperationModes     : 0
ISDNoverlayOperationModes     : 0
POTSoverlayPermissions        :  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]
ISDNoverlayPermissions        :  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]  [ 0]


CarrierMask :  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]
               [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]
STATIC CONFIGURATION DATA :

UtopiaMode                     : 0
UtopiaFast                     : 0
UtopiaSlow                     : 0
Analog FrontEnd Id             : 0
Max Bits Per Tone US           : 13
Max Bits Per Tone DS           : 14
GoldenMode                     : 0
T_ITU_VendorId                 : countryCode     0
                               : reserved        0
                               : vendorCode      0
                               : vendorSpecific  0
Max DS line rate               : 65535
ManagementVersion              : 0
serialNumber                   :  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]
                               :  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]
                               :  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]  [0]
                               :  [0]  [0]
vendorRevMinusOne              : 510 4.2.10.0.0
options                        : 0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.
vendorIdentif_ANSI_ETSI        : 0
ISDN_extendedBandwidth         : ISDN_EXT_BW_MODE_0_OR_POTS
modem_trace                    : TRACE_PRINT_OFF



POWER CONFIGURATION DATA :

powerStateControl              : 8

[td]=>:td call cmd="sachem get_state"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Current modem state : SHOWTIME.

[td]=>:td call cmd="atml pstats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Port    Rx0+1      Rx0    Tx0+1      Tx0  Disc0+1    Disc0      HEC   Header
----    -----      ---    -----      ---  -------    -----      ---   ------
   0  1208693  1208693   205913   205865        0        0        0        0
   1        0        0        0        0        0        0        0        0
   2        0        0        0        0        0        0        0        0
   4   205865   205865  1208693  1208693        0        0        0        0
   5        0        0        0        0        0        0        0        0

[td]=>:td call cmd="atml gstats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

        # of incoming cells (CLP0+1)      = 1414568.
        # of incoming cells (CLP0)        = 1414568.
        # of discarded cells              = 0.
        # of overbooked discards (ng/g)   = 0/0.
        # of selective discards (ng/g)    = 0/0.
        # of full discards (ng/g)         = 0/0.
        Normal access times (min/avg/max) = 0/1/943us.
        Timer requests/retries            = 10435912/6240500(59%)

[td]=>:td call cmd="atml istats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Total # of cell IP interrupts   = 38724.
    # of diverse interrupts         = 38724.
        # of PM events processed        = 38724.

Total # of events processed     = 38724.

[td]=>:td call cmd="atm sxt"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

   # VxLLo VxLHi  PrtLo-VPILo-VCILo PrtHi-VPIHi-VCIHi AS OSlh/OShl   Timelh
---------------------------------------------------------------------------
   1     1     2     [0]  15/16     [4]   0/32        UP   UP   UP    0:00:16.19
   2     3     4     [0]   8/48     [4]   0/33        UP   UP   UP    0:00:16.19
   3     5     6     [0]   0/16     [4]   0/34        UP   UP   UP    0:00:16.19

[td]=>:td call cmd="atm stt"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

   # Ref Type  Name     BE FD Cl  Parameters
--------------------------------------------
   0   0    1  UBR       Y  N  0
   1   0    0
   2   2    2  UBR.0     Y  Y  0  PCR=150
   3   2    2  UBR.0     Y  N  0  PCR=16

[td]=>:td call cmd="atm svt"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

   # Type   Port-VPI-VCI  CAC UPC   Kind TxTD RxTD VXX     XType  Encaps
------------------------------------------------------------------------
   1 VCL    [0]  15/16      N   N    PVC    2    0   1       PTP
   2 AAL5   [4]   0/32      N   N    PVC    0    2   1       PTP  unknown
   3 VCL    [0]   8/48      N   N    PVC    0    0   2       PTP
   4 AAL5   [4]   0/33      N   N    PVC    0    0   2       PTP  unknown
   5 VCL    [0]   0/16      N   N    PVC    3    0   3       PTP
   6 AAL5   [4]   0/34      N   N    PVC    0    3   3       PTP  unknown
 349 ROOT   [0]   0         N   N
 350 ROOT   [0]   8         N   N
 351 ROOT   [4]   0         N   N
 352 ROOT   [0]  15         N   N

[td]=>:td call cmd="sea sq"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

 # FIFO          Start      End     Read    Write   Number   Size
-- ----          -----      ---     ----    -----   ------   ----
 0: AAL5_0    0007ebf0 0007f284 0007ebf8 0007ebf8        0    422
 1: AAL5_1    0007f288 0007f91c 0007f2d8 0007f2d8        0    422
 2: AAL5_2    0007f920 0007ffb4 0007fe60 0007fe60        0    422
32: ETQ       0008bef0 0008c584 0008c468 0008c468        0    422
33: PPQ       0008c588 0008c850 0008c68c 0008c68c        0    179
34: TCQ       0008c854 0008cee8 0008ccd0 0008ccd0        0    422
35: TRQ       0008ceec 0008d580 0008d368 0008d368        0    422
36: RCQ       0008d584 0008db18 0008d930 0008d930        0    358
37: FPQ       0008db1c 0008e0b0 0008dec4 0008dec4        0    358
38: FBQ       0008e0b4 0008ebe0 0008e360 0008e348      710    716
39: FDQ       0008ebe4 00090238 0008f17c 0008fc94      710   1430

[td]=>:td call cmd="sea bstats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Periodic statistics enabled - period = 5 seconds.
[td]=>Port Name     Rxed: fps -  bps  Txed: fps -  bps  Discarded: fps
---- ----     ----------------  ----------------  --------------
   0 OBC           1 -     899       1 -     544               0
   1 ETHERNET      1 -     678       1 -     902               0
  15 NATIVE        0 -      22       0 -      22               0

[td]:td call cmd="sea istats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Total # of packet IP interrupts       = 222801.
# of diverse interrupts               = 222859.
        # of packet extraction interrupts         = 90150.
        # of packet released interrupts           = 93931.
        # of performance monitoring interrupts    = 38921.
# of dynamic memory interrupts        = 0.
# of configuration problem interrupts = 0.
# of AAL5 interrupts                  = 0.
# of Ethernet interrupts (Rx/Tx)      = 0/0.
# of bridge interrupts                = 39.
        # of packet port changed interrupts       = 0.
        # of address learned interrupts           = 0.
        # of address forgotten interrupts         = 0.
        # of packet event overflows               = 0.

[td]=>:td call cmd="sea pstats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Port    Frames-Rx    Frames-Tx    Octets-Rx    Octets-Tx     Discards
---------------------------------------------------------------------
   0        95112        90291     68651279 15019564551625            0
   1        39032        55101      8986961     60767068            0
  15        51259        40011     56194626      8128770            0

[td]=>:td call cmd="upnp stats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

UPnP pool stats (cur,max,avail):
  handle(0,0,3),
  device(0,0,30),
  service(0,0,30),
  subscription(0,0,50),
  firstdeviceevent(0,0,50),

UPnP subscription stats:
  Timer list length: 0 current, 0 max.
  Notify sockets: 0 current, 4 total
  Notify timeouts: 0 connect, 0 reply
  Notify data: 0 updated, 0 extended
  Notifies: 0 sent, 0 started, 0 delayed

Current time (sec): 39025

[td]=>:td call

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

cmd = eth stats
:td call cmd="eth stats"
ETH0: Ethernet statistics:
        Tx/Rx frames         = 91/111
        Tx/Rx octets         = 13002/7914
        Tx/Rx multicast      = 0/0
        Tx/Rx broadcast      = 0/0
        Rx - discarded       = 0
        Alignment errors     = 0
        FCS errors           = 0
        Single collisions    = 0
        Multiple collisions  = 0
        SQE test errors      = 0
        Deferred frames      = 0
        Late collisions      = 0
        Excessive collisions = 0
        Internal Tx errors   = 0
        Carrier sense errors = 0
        Too long frames      = 0
        Internal Rx errors   = 1
        Symbol errors        = 0

        Too long frames      = 1
        Too short frames     = 0
        Invalid preambles    = 0
        Rx - FCS errors      = 0
        Unaligned frames     = 0
        Rx - overruns        = 0
        Link failures        = 2
        Excessive deferrals  = 0
        Tx - underruns       = 0
        Excessive lengths    = 0
        Deferred frames      = 0
        Tx - FCS errors      = 0
        Late collisions      = 0
        Total collisions     = 0

[td]=>:td call cmd="err stats"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Last Reset Reason : WARM_RESET
-------------------------------------
ERR_CLASS_RECOV         = 00000000
ERR_CLASS_NOTIFY_ONLY   = 00000000
ERR_CLASS_NON_RECOV     = 00000000
ERR_CLASS_HW_ERROR      = 00000000
ERR_CLASS_SW_CORRUPT    = 00000000
ERR_CLASS_FILE_CORRUPT  = 00000000
ERR_CLASS_STACK_CORRUPT = 00000000
ERR_CLASS_HW_WDOG_EXP   = 00000000
ERR_CLASS_SW_WDOG_EXP   = 00000000
ERR_CLASS_PARITY_ERROR  = 00000000
ERR_CLASS_WARM_RESET    = 00000000
ERR_CLASS_COLD_RESET    = 00000000
ERR_CLASS_FRC_HW_WDOG   = 00000000
ERR_CLASS_ERROR_HANDLER = 00000000
ERR_CLASS_PROC_FAULTS   = 00000000
ERR_CLASS_UNKNOWN       = 00000000

(some errors are normal!)

[td]=>:td call cmd="atm tvc 0 8 48"

=====================DISCLAIMER======================
 Access to expert commands is intended for qualified
 personnel only.
==================END=OF=DISCLAIMER==================

Tracing enabled for VP/VC 8/48.